Courses
Learn alongside industry-leading experts from around the world. Courses cover everything from diagnosis and treatment planning to surgical and prosthetic workflows. We even address some of the most complex and progressive protocols for managing potential complications.
Event type
CE credits
Language
July 2024
Vom Scan zum Provisorium in 60 Minuten
September 2024
DACH-Symposium „Effizienz in der Praxis“
Zeit wird immer mehr zu einem bestimmenden Faktor, wenn es um den Erfolg Ihrer Praxis geht. Deshalb finden Sie bei Nobel Biocare – getreu unserem Credo „Pioneering the past. Leading the future.“ - immer wieder neue Entwicklungen, die Ihnen als Behandler helfen, die Herausforderungen der Zukunft noch besser zu meistern.
Beim großen DACH-Symposium „Effizienz in der Praxis“ erleben Sie die neueste Technik und aktuellen wissenschaftlichen Erkenntnisse zum digitalen Workflow in der Praxis.
Und Sie erfahren, wie Sie in Zukunft mit hoher Effizienz, Schnelligkeit und Sicherheit den medizinischen und wirtschaftlichen Vorsprung Ihrer Praxis weiter ausbauen können. Und wie wir Sie mit unserer Haltung „Pioneering the Past. Leading the Future.“ dabei unterstützen.
Das Ganze in einer wunderbaren Location – dem Gut Brandlhof in Saalfelden mit einem spannenden Rahmenprogramm sowie interessanten Diskussionen mit Kollegen und Referenten. Sie können live dabei sein und gemeinsam mit uns eine gute Zeit in einer spektakulären Bergwelt genießen.
Wir freuen uns auf Sie, auf interessante Gespräche, Vorträge, Diskussionen und Erlebnisse.
Global Dental Mentorship - Restorative and Surgical Implant Hands-On
The hands-on MIT course is designed to familiarize you with implant components both surgically and prosthetically. In addition, the goal is for you to gain comfort with the procedures as outlined below. For those of you with experience in dental implants, you will gain tips and tricks from our experienced clinicians. Given the synergy between surgery and prosthetics, it’s important to understand both, regardless of your area of interest.
Learning Objectives:
The following model-based procedures will be included in the hands-on instruction:
1) Review anatomy and surgical protocol
2) Place 2 implants for mandibular overdenture
3) Place single implants
4) Suturing procedures on a soft tissue model
5) Temporary crown fabrication
6) Place, pick up, and size locators for mandibular overdentures
Course Fee
- $745 CAD
CE Credits
- 8 hours
SprintRay Advanced Training
Dank der jüngsten Fortschritte in Technologie, Design und Materialien weitet sich der Einsatz von dentalen 3D-Druckern schnell vom Dentallabor in die Zahnarztpraxis aus. Wie funktioniert diese spannende Technologie eigentlich und warum ist der 3D-Druck so geeignet für die Zahnmedizin?
Nobel Biocare und SprintRay arbeiten eng zusammen, um die 3D-Drucktechnologie landesweit in Zahnarztpraxen einzuführen. Wir wollen zusammen mit SprintRay die Zahnmedizin verändern, indem wir unsere Kunden erstklassig schulen lassen, damit diese ihren Patienten qualitativ hochwertige und kostengünstige Behandlungen anbieten können und hierdurch einen Mehrwert in ihrer Praxis erzielen.
Seien Sie gespannt auf zwei Schulungstage mit den Teams von Nobel Biocare und SprintRay. Lernen Sie vor Ort in Weiterstadt auch den 60 Minuten Workflow von Nobel Biocare kennen – dieser wird auch Sie überzeugen.
Wir freuen uns auf Sie!
Ihr Nobel Biocare Team in Zusammenarbeit mit SprintRay
October 2024
Innovation in implantology conference 2024 with Nobel Biocare Canada
Rising Stars - 3 Schritte zum Erfolg
November 2024
Rising Stars - 3 Schritte zum Erfolg
Prothetik, Versorgungsmöglichkeiten und was zu beachten ist, mit Hands-on
Hands-on training Introduction to implant prosthodontics and intraoral scanning
This introduction to Implant Prosthodontics Hands-On Training Program is designed for general dentists and members of their team to learn to handle and use implant surgical and prosthodontic components. Participants will be introduced to, and use, surgical drills and all surgical components required for an appropriate surgical drilling sequence, drilling into model blocks of varying densities and placement of a dummy implant. Prosthodontic components ranging from healing abutments, temporary abutments, impression copings and overdenture solutions will be discussed and handled. You will also learn about the benefits of intra-oral scanning for the patient and clinic as well as smile design and the importance of clinical photos. Participants practice scanning on models and each other.
Tuition: $49 CAD
Plus applicable taxes
CE Credits : 2
Faculty:
Dr. John Zarb
Ms. Flora Santos
Mr. Terry Xie
Contact :
1-877-229-6002
courses@genesiseducation.ca
Implantologie einmal anders betrachtet. Modul 5 – Implantatprothetik. Grenzen und Möglichkeiten im Wandel der Zeit
Introduction to Digital Guided Surgery
This introductory program is perfectly suited for the general dentist wanting to embrace the enormous benefits and broad application of guided surgery. This full day didactic program will focus on the entire digital workflow available today for the management of patients requiring the replacement of the single tooth, multiple missing teeth, and the full arch. Participants will gain a profound understanding of the rationale and advantages conferred by digital planning and guidance. Emphasis will be placed on discussions related to understanding techniques for following a systematic digital workflow to achieve optimum implant positioning.
Learning Objectives
- Review and understand CBCT imaging and pertinent anatomy related to implant placement
- Compare and contrast analog and digital protocols for single tooth, short span and full arch rehabilitation
- Review the benefits of immediate-load protocols with a digital workflow
- Understand the learning curves, limitations and complications that may be associated with guided surgery
Tuition: $499 CAD
Plus applicable taxes
CE Credits : 7
Faculty:
Dr. John Zarb
Dr. Steven Bongard
Dr. David Powell
Dr. Philip Walton
Contact :
1-877-229-6002
courses@genesiseducation.ca
Introduction to Digital Workflow Hands-on training
This introductory program is perfectly suited for the general dentist wanting to embrace the enormous benefits and broad application of guided surgery. This half day training program will focus on the entire digital workflow(model based intra-oral scanning an digital virtual planning) available today for the management of patients requiring the replacement of the single tooth.
Learning Objectives
- Learn how to take an intra oral scan
- Learn how to merge an STL file (intra oral scan) and a DICOM file (CBCT images)
- Learn to perform digital planning for prosthetically driven implant placement for the single implant
- Learn how to communicate with the dental laboratory for the fabrication of a surgical guide and the fabrication of an immediate provisional restoration
Tuition: $199 CAD
Plus applicable taxes
CE Credits : 3
Faculty:
Dr. David Powell
Mr. Terry Xie
Contact :
1-877-229-6002
courses@genesiseducation.ca
December 2024
Incorporating the immediate full arch fixed solution into your practice
This 2-day program will show case all the steps involved in the diagnosis, treatment planning, and execution of immediate provisionalization for the full-arch hands-on training, you will understand this remarkable same day solution for completely edentulous patients and those with a terminal dentition.
- Case selection and treatment planning.
- Pre-operative, surgical and prosthodontic workflows.
- Hands-on experience for the conversion of a removable complete denture into a fixed immediately inserted transitional prosthesis.
Tuition: $3,499 CAD
Tuition includes 1 dentist and 2 staff members.
$2,499 CAD for additional dentists or denturists.
CE Credits : 14
Faculty:
Dr. Alex Bongard
Dr. Steven Bongard
Ms. Michelle Ryckman
Ms. Flora Santos
Mr. Terry Xie
Dr. John P. Zarb
Contact :
1-877-229-6002
courses@genesiseducation.ca
March 2025
"BE NOBEL" – Moderne digitale Implantologie in 5 Modulen
Foundation for Oral Rehabilitation (FOR)
FOR is a global, non-profit organization advocating science, education and humanity in oral rehabilitation. The www.for.org website offers hundreds of learning resources for dental professionals: More than 300 video lectures from leading experts. Almost 100 clinical case documentations. Interactive ebooks and epapers. State-of-the-art treatment guidelines. And much more. Completely free of charge. Sign up now and get access to all resources.
Questions? Just ask.
If you can’t find what you’re looking for or need additional event information, we want to hear from you.