Veranstaltungen

This 2 day didactic and hands-on program is for the GP who wants to improve their fundamental surgical skill set. Participants will be able to experience a wide variety of
surgical procedures typically seen in a GP office, but the emphasis will be on developing effective clinical skills in flaps, suturing and extractions.

This course is limited attendance with a low instructor to student ratio and will take place in our simulation lab where you will learn on phantom heads, special dental models, and pig mandibles.

Learning Objectives

• Effectively assess patient and procedural risks
• Develop proficiency in the selection and use of surgical instruments
• Learn and apply surgical approaches to minimize tissue traumaManage
• Recognize and manage complications

Simulation lab experience will include:

• Flap design
• Suturing (interrupted, continuous locking, figure of 8)
• Biopsy techniques
• Simple extractions (forceps and elevators)
•  Surgical extractions (bone and soft tissue sparing)
• Impactions (lower mesio-angular and horizontal)
• Root removal
• Incision and Drainage (drain placement)
• Oral-antral penetration repair (sliding flaps)
• Tongue and lip tie revision
• Socket preservation and basic GB
• Sinus bump (Summers procedure)
• Connective tissue grafting
• Introduction to implant placement (guided and freehand)

This interactive course is structured to provide step-by-step training at a very personal level. It employs case-based learning by emphasizing evidence-based learning for daily usage. Participants will learn from the basic tools to the latest advancements in digital implant dentistry. Streamlined clinical and digital workflows will be presented to increase efficiency and clinical outcomes. All the secrets of static guided surgery and X-Guide dynamic navigation will be unveiled to discern when and how to use the different surgThis interactive course is structured to provide step-by-step training at a very personal level. It employs case-based learning by emphasizing evidence-based learning for daily usage. Participants will learn from the basic tools to the latest advancements in digital implant dentistry. Streamlined clinical and digital workflows will be presented to increase efficiency and clinical outcomes. All the secrets of static guided surgery and X-Guide dynamic navigation will be unveiled to discern when and how to use the different surgical options, including the review of the current CBCT, IOS and Face scanning technologies.

The DTX Studio™ Clinic, DTX Studio™ Implant and DTX Studio™ Lab software will be presented, explaining how to simplify the digital workflow for predictable guided immediate implant placement and immediate loading. The digital implant planning rules for anterior, posterior and full arch cases will be reviewed and updated to achieve biological, functional and esthetic success. The attendees will improve their own confidence and skills with digital planning through immersive software hands-on.

Indications and limitations of the static and dynamic guided surgery will be reviewed and discussed, from simple flapless to advanced procedures, including digital assisted soft tissue sculpturing (DASS Technique), Guided Socket Shield protocols and X-Act Teeth. Special emphasis will be given to interdisciplinary digitally assisted treatment planning and final aesthetics in the different clinical scenarios.

Learning outcomes

• Gain an update on CBCT and IOS protocols, and extraoral stereophotogrammetry
• Identify the differences between static and dynamic guided surgery vs Dynamic Navigation Guidelines
• Apply static & dynamic virtual patient creation
• Explore all components of DTX Studio™ 
• Understand the digital integration of guided surgery and guided prosthetics
• Experience the digitally assisted immediate implant placement and loading in the anterior and posterior zones

Plan de Traitement et restauration - cas complexes 

Programme:

Sélection du patient édenté (ou en voie de l’être) et prothèse complète sur implants

• Anamnèse médicale et dentaire

Gestion de la phase provisoire

• Mise en charge Immédiate ou différée

Options de restaurations définitives

• Les particularités du Maxillaire All on 6
• Les particularités du all on 4 mandibulaire
• Restaurations fixes sur implants (Bridges/All on 4/6®)
• Restaurations amovibles (overdenture, locators)

Communication

• Durée du traitement
• Coût des différents traitements

Gestion de la maintenance

 Contact : Valérie – 03 20 98 09 36 ou valerie.drhary@wanadoo.fr

Flapless immediate implant placement and provisionalization (FIIPP) is a modern treatment method characterized by fast time-to-teeth, less surgical interventions with equal or better prosthetic results and an improved patient acceptance.  

In this course, we will take you through each step of the FIIPP protocol from diagnosis over treatment planning to surgical and prosthetic protocols. We will demonstrate the methods that can optimize predictable, long-term treatment success. Amongst the topics covered are the One abutment one time concept, the use of the N1 Base, and other Nobel Biocare products.

Learning outcomes:

• Understand the relevant diagnostic tools
• Select the optimal indication 
• Understand the application of the planning and surgical protocol 
• Identify the options for provisionalization
• Understand the do's and don'ts for the supra-structures
• Identify factors influencing long-term predictability and outcome

Join us as we delve into the exciting world of dental technology, where we uncover the obstacles we faced and conquered on our journey to becoming an all-digital dental implant center and laboratory.

Learn how to place dental implants in to abundant bone predictably, efficiently, and successfully. This comprehensive course is filled with hands-on exercises to prepare you for socket preservation, flap design, implant placement, and suturing. With your purchase you will have access to Session One ONLINE curriculum for up to 1 year so that you can go back and review as often as you want.

Приглашаем ортопедов и зубных техников на практический курс, посвященный всем аспектам протезирования и особенностям изготовления конструкций по концепции All-on-4®

День 1. Лекционная часть

1. Диагностический максимум: первичная консультация, Rg-диагностика, фотопротокол, сбор анамнеза. Пациенты с дисфункциями ВНЧС особенности работы.

2. Первичный анализ: междисциплинарное

взаимодействие: врач ортопед-хирург-зубной техник-смежные специалисты.

3. Выбор временной конструкции - ортопедический и технический этапы.

4. Изготовление диагностических и хирургических шаблонов (DTX Studio™ Implant).

5. Аналоговый и цифровой постоперационный протокол временного протезирования Аll-on-4®, на 6, 8 имплантатах. Работа с искусственной десной и без.

День 1. Практическая часть 

В ходе практической части будет реализован:

Перевод перичного шаблона для перебазировки в армированный временный фиксированный протез с использованием TiReBar

Демонстрация временного постоперационного протезирования в протоколах без искусственной десны

День 2. Лекционная часть

Изготовление постоянного протеза All-on-4®, на 6, на 8 имплантатах:

. виды конечных работ;

. методика работы гипсом;

. цифровые оттиски;

. объем передаваемой информации зубному технику;

. разбор клинических случаев.

Использование DSD для коммуникации между пациентом и зубным техником.

День 2. Техническая часть

. снятие аналоговых оттисков гипсом;

. снятие цифровых оттисков с использованием внутриротового сканера;

. регистрация RP с использованием Hardwax;

. работа с лицевыми дугами.

День 2. Практическая часть

Демонстрация на пациенте:

1. Изготовление постоянной конструкции.

2. Подготовка и моделировка балок Procera Bar, Procera Bridge под

керамические и композитные реставрации. Демонстрация вариантов облицовок балок.

3. Индивидуализация десны композитным материалом Nexco Paste.

Erleben Sie, wie medizinisches Know-how, 3D-Druck und steuerliche Expertise  Ihre Praxis voranbringen!

Dr. Markus Spörl, Zahnarzt, und Anita Spörl, Steuerberaterin, zeigen, wie Sie mit dem X-Guide^®-System moderne Implantologie effizient umsetzen – und Steuervorteile optimal nutzen.

Erfahren Sie kompakt:

• Wie X-Guide digital in den Praxisalltag passt. 
• Der Zahnarzt als Arbeitgeber, Unternehmer & Kapitalanleger was gibt es  steuerlich zu beachten? 
• SprintRay Druckerstraße: Innovation trifft Effizienz

Für alle, die ihre Praxis zukunftssicher, effizient und wirtschaftlich stark aufstellen möchten.

Course Overview

Join Malo Clinic and SprintRay for a 2-day hands-on training that will teach you to incorporate 3D printing technology into the All-on-X treatment concept.

Objectives:

• Master the All-on-X concept using state-of-the-art digital tools.
• Learn to plan and execute surgeries with stackable guides and photogrammetry.
• Observe a live remote surgery to learn how to reduce delivery time to less than three hours.
• Perform hands-on digital surgery and prosthesis relining on 3D-printed models.
• Integrate 3D printing workflow into your practice for efficient full-arch restorations.