Wie funktioniert die Umsetzung des digitalen Workflows in der Praxis? 

Kann das nur bei Einzelimplantaten oder auch bei komplexeren Versorgungen angewandt werden? Neben der notwendigen Hard- und Software zeigen wir schrittweise die Umsetzung und fügen alle Komponenten im All-on-4^® Behandlungskonzept zusammen. Bei dem seit über 25 Jahren bewährten Verfahren zur Versorgung ganzer Kiefer mit festsitzenden implantatgetragenen Zähnen vereinfacht die Digitalisierung die Umsetzung enorm. 

Wir zeigen Ihnen, wie Sie mit unserem entwickelten Vorgehen in wirklich einer Sitzung den Patienten wieder mit festsitzenden provisorischen Zähnen rehabilitieren können.

Basic implant mini residency in-person modules

Module 1: Comprehensive implant treatment planning

Date: Oct 25-26, 2024

Module 2: Implant surgical principles: models, pig jaws & cadavers

Date: Jan 17-19, 2025

Module 3: Live patient surgery
Date: April 4-6, 2025


Module 4: Live patient prosthetics
Date: Sept 12-14. 2025

Online webinar (8 pre-recorded sessions)

Session 1 - Contemporary Implant Dentistry : The Essentials November 28-30, 2024

Session 2 - Cutting Edge Implant Therapy - Posterior Zone February 6-8, 2025

Session 3 - Advanced Hard Tissue Defect Reconstruction June 19-21, 2025

Session 4 - Implants in the Aesthetic Zone September 18-20, 2025

Session 5 - The Totally Edentulous Patient November 5-7, 2026

MASTERING IMPLANTOLOGY

COMPREHENSIVE TRAINING

For decades, we have dreamed of sharing our knowledge and clinical experience with ambitious dentists. Driven by the idea of pursuing new and forward-looking paths in dental education, we have developed five advanced sessions in implantology that offer participants a new learning experience. This experience will become a defining moment in your continuing professional development, allowing you to take your practice to the next level. Through this specialized training, we offer our participants a new vision of contemporary implantology. Training based on scientific literature and techniques clinically applied in our practice for the past 30 years and that allows you to offer your patients optimal and predictable results.
Our goal is to offer advanced refresher courses that challenge participants, improve their manual dexterity, and their surgical and prosthetic skills so that they are able to apply the techniques learned in their own practice as soon as the course is over.
No matter your level of training in implantology, this course is designed to leave you with increased confidence, new skills and renewed practice. A training combining clinically applicable scientific evidence, practical exercises and live surgeries on the patient.
Our modern training facilities in Quebec City await you with a unique spirit and a very special atmosphere. The friends and colleagues you will meet here may come from very different national and professional backgrounds, but they have one thing in common that unites them all: they are very passionate about their profession!

The hands-on MIT course is designed to familiarize you with implant components both surgically and prosthetically. In addition, the goal is for you to gain comfort with the procedures as outlined below. For those of you with experience in dental implants, you will gain tips and tricks from our experienced clinicians. Given the synergy between surgery and prosthetics, it’s important to understand both, regardless of your area of interest.

Learning Objectives:

The following model-based procedures will be included in the hands-on instruction:

1) Review anatomy and surgical protocol

2) Place 2 implants for mandibular overdenture

3) Place single implants

4) Suturing procedures on a soft tissue model

5) Temporary crown fabrication

6) Place, pick up, and size locators for mandibular overdentures

The hands-on MIT course is designed to familiarize you with implant components both surgically and prosthetically. In addition, the goal is for you to gain comfort with the procedures as outlined below. For those of you with experience in dental implants, you will gain tips and tricks from our experienced clinicians. Given the synergy between surgery and prosthetics, it’s important to understand both, regardless of your area of interest.

Learning Objectives:

The following model-based procedures will be included in the hands-on instruction:

1) Review anatomy and surgical protocol

2) Place 2 implants for mandibular overdenture

3) Place single implants

4) Suturing procedures on a soft tissue model

5) Temporary crown fabrication

6) Place, pick up, and size locators for mandibular overdentures

This 2 day didactic and hands-on program is for the GP who wants to improve their fundamental surgical skill set. Participants will be able to experience a wide variety of
surgical procedures typically seen in a GP office, but the emphasis will be on developing effective clinical skills in flaps, suturing and extractions.

This course is limited attendance with a low instructor to student ratio and will take place in our simulation lab where you will learn on phantom heads, special dental models, and pig mandibles.

Learning Objectives

• Effectively assess patient and procedural risks
• Develop proficiency in the selection and use of surgical instruments
• Learn and apply surgical approaches to minimize tissue traumaManage
• Recognize and manage complications

Simulation lab experience will include:

• Flap design
• Suturing (interrupted, continuous locking, figure of 8)
• Biopsy techniques
• Simple extractions (forceps and elevators)
•  Surgical extractions (bone and soft tissue sparing)
• Impactions (lower mesio-angular and horizontal)
• Root removal
• Incision and Drainage (drain placement)
• Oral-antral penetration repair (sliding flaps)
• Tongue and lip tie revision
• Socket preservation and basic GB
• Sinus bump (Summers procedure)
• Connective tissue grafting
• Introduction to implant placement (guided and freehand)

Wer Implantologie betreibt, der weiß, was auch die wissenschaftlichen Untersuchungen bestätigen: Das Weichgewebe um ein Implantat ist ein sehr schwer zu erhaltendes und noch schwerer zu schaffendes Gewebe. 

Der Inhalt in diesem Kurs ist speziell dem Weichgewebe, Freilegungen und Weichgewebetransplantaten sowie der Schaffung adäquater Verhältnisse um das Implantat herum gewidmet. 

Chirurgische Komplikationen und Periimplantitis lassen sich in keiner implantologisch tätigen Praxis gänzlich vermeiden – oder doch? Können wir es mit moderner Hardware schaffen, das Problem zu reduzieren? 

In diesem Kurs wird das Implantat des in Kurs 1 versorgten Patienten freigelegt, so dass der Behandlungsablauf praxisrelevant nachverfolgt werden kann. Durch die entsprechende Bilddokumentation des bisherigen Behandlungsablaufs ist der Inhalt dieses Seminars auch für Teilnehmer, die nur diesen Kurs besuchen wollen, komplett nachvollziehbar.

Alle Patienten, die uns mit dem Wunsch nach einer implantologischen Behandlung aufsuchen, kommen letztendlich wegen des zu verankernden Zahnersatzes zu uns. Deshalb steht zum Abschluss der Fortbildungsreihe die Prothetik im Fokus. 

Die unterschiedlichen Lösungen, die prothetisch in der Implantologie möglich sind, werden mit Bewertung der diversen Materialien dargestellt. Von Einzelzähnen bis hin zu zahnlosen Kiefern. Ideal in Kombination mit Ihrem Zahntechniker. Der während der gesamten Kursreihe behandelte Patientenfall wird mit der endgültigen Prothetik nach dem aufgezeigten Konzept versorgt (Video). Auch in diesem Seminar mit dem Schwerpunkt Zahnersatz werden alle gezeigten Fälle so dargestellt, dass auch Teilnehmer, die an den vorhergehenden Kursen nicht teilgenommen haben, inhaltlich komplett folgen können.

Session 1 - Contemporary Implant Dentistry : The Essentials November 28-30, 2024

Session 2 - Cutting Edge Implant Therapy - Posterior Zone February 6-8, 2025

Session 3 - Advanced Hard Tissue Defect Reconstruction June 19-21, 2025

Session 4 - Implants in the Aesthetic Zone September  18-20, 2025

Session 5 - The Totally Edentulous Patient November 5-7, 2026

MASTERING IMPLANTOLOGY

COMPREHENSIVE TRAINING

For decades, we have dreamed of sharing our knowledge and clinical experience with ambitious dentists. Driven by the idea of pursuing new and forward-looking paths in dental education, we have developed five advanced sessions in implantology that offer participants a new learning experience. This experience will become a defining moment in your continuing professional development, allowing you to take your practice to the next level. Through this specialized training, we offer our participants a new vision of contemporary implantology. Training based on scientific literature and techniques clinically applied in our practice for the past 30 years and that allows you to offer your patients optimal and predictable results.
Our goal is to offer advanced refresher courses that challenge participants, improve their manual dexterity, and their surgical and prosthetic skills so that they are able to apply the techniques learned in their own practice as soon as the course is over.
No matter your level of training in implantology, this course is designed to leave you with increased confidence, new skills and renewed practice. A training combining clinically applicable scientific evidence, practical exercises and live surgeries on the patient.
Our modern training facilities in Quebec City await you with a unique spirit and a very special atmosphere. The friends and colleagues you will meet here may come from very different national and professional backgrounds, but they have one thing in common that unites them all: they are very passionate about their profession!