Encontrar cursos

L'hygiène dentaire n'a plus de secret pour vous, qu'en est-il des implants?

Une surface rugueuse métallique ankylosée dans l'os n'est pas analysée de la même manière qu'une surface lisse, logée dans un système amortisseur et protecteur.

Tous les implants sont-ils les mêmes? Présentent-ils tous les mêmes fragilités face au techniques d'hygiène de nos patients? Comment puis-je au mieux organiser mon contrôle, mes conseils et mes actes pour être le plus performant pour les implants de mes patients?

Autant de questions et bien d'autres qui trouveront une réponse dans cet exposé.

The hands-on MIT course is designed to familiarize you with implant components both surgically and prosthetically. In addition, the goal is for you to gain comfort with the procedures as outlined below. For those of you with experience in dental implants, you will gain tips and tricks from our experienced clinicians. Given the synergy between surgery and prosthetics, it’s important to understand both, regardless of your area of interest.

Learning Objectives:

The following model-based procedures will be included in the hands-on instruction:

1) Review anatomy and surgical protocol

2) Place 2 implants for mandibular overdenture

3) Place single implants

4) Suturing procedures on a soft tissue model

5) Temporary crown fabrication

6) Place, pick up, and size locators for mandibular overdentures

Course Fee

• $745 CAD

CE Credits

• 8 hours

Orale implantologie is niet meer weg te denken uit het aanbod van behandelingen die u als mogelijke behandeloptie aan uw patiënt kan voorleggen.

Implantologie wordt steeds belangrijker in de algemene praktijk. Doorgaans ziet de algemeen practicus wel de indicatie en is hij daarnaast ook in steeds grotere mate bereid om de prothetische suprastructuur te vervaardigen. 

Aan de hand van klinische casussen en hands-on oefeningen wordt de cursist wegwijs gemaakt vanaf de diagnostiek tot de afbehandeling van de suprastructuur.

De cursist krijgt de kans om kennis te maken met de techniek en hindernissen tijdens de definitieve afdruk. Hij zal leren om een afgewogen keuze te maken tussen de verschillende implantaatopbouwen die beschikbaar zijn. Inzicht wordt verschaft in de methode van het plaatsen en vastzetten van prothetische structuren op implantaten.

Aan het einde van de dag heeft de deelnemer voldoende bagage gekregen om in vertrouwen zijn implantaatcasus aan te vatten. 

This introduction to Implant Prosthodontics Hands-On Training Program is designed for general dentists and members of their team to learn to handle and use implant surgical and prosthodontic components. Participants will be introduced to, and use, surgical drills and all surgical components required for an appropriate surgical drilling sequence, drilling into model blocks of varying densities and placement of a dummy implant. Prosthodontic components ranging from healing abutments, temporary abutments, impression copings and overdenture solutions will be discussed and handled. You will also learn about the benefits of intra-oral scanning for the patient and clinic as well as smile design and the importance of clinical photos.  Participants practice scanning on models and each other.

Tuition: $49 CAD

Plus applicable taxes

CE Credits : 2

Faculty:

Dr. John Zarb

Ms. Flora Santos

Mr. Terry Xie

Contact :
1-877-229-6002
courses@genesiseducation.ca

This introductory program is perfectly suited for the general dentist wanting to embrace the enormous benefits and broad application of guided surgery. This full day didactic program will focus on the entire digital workflow available today for the management of patients requiring the replacement of the single tooth, multiple missing teeth, and the full arch.  Participants will gain a profound understanding of the rationale and advantages conferred by digital planning and guidance. Emphasis will be placed on discussions related to understanding techniques for following a systematic digital workflow to achieve optimum implant positioning.

Learning Objectives

• Review and understand CBCT imaging and pertinent anatomy related to implant placement
• Compare and contrast analog and digital protocols for single tooth, short span and full arch rehabilitation
• Review the benefits of immediate-load protocols with a digital workflow
• Understand the learning curves, limitations and complications that may be associated with guided surgery

Tuition: $499 CAD

Plus applicable taxes

CE Credits : 7

Faculty:

Dr. John Zarb

Dr. Steven Bongard

Dr. David Powell

Dr. Philip Walton

Contact :
1-877-229-6002
courses@genesiseducation.ca

This introductory program is perfectly suited for the general dentist wanting to embrace the enormous benefits and broad application of guided surgery. This half day training program will focus on the entire digital workflow(model based intra-oral scanning an digital virtual planning) available today for the management of patients requiring the replacement of the single tooth.

Learning Objectives

• Learn how to take an intra oral scan
• Learn how to merge an STL file (intra oral scan) and a DICOM file (CBCT images)
• Learn to perform digital planning for prosthetically driven implant placement for the single implant
• Learn how to communicate with the dental laboratory for the fabrication of a surgical guide and the fabrication of an immediate provisional restoration

Tuition: $199 CAD

Plus applicable taxes

CE Credits : 3

Faculty:

Dr. David Powell

Mr. Terry Xie

Contact :
1-877-229-6002
courses@genesiseducation.ca

This 2-day program will show case all the steps involved in the diagnosis, treatment planning, and execution of immediate provisionalization for the full-arch hands-on training, you will understand this remarkable same day solution for completely edentulous patients and those with a terminal dentition.

• Case selection and treatment planning.
• Pre-operative, surgical and prosthodontic workflows. 
• Hands-on experience for the conversion of a removable complete denture into a fixed immediately inserted transitional prosthesis.

Tuition: $3,499 CAD

Tuition includes 1 dentist and 2 staff members.

$2,499 CAD for additional dentists or denturists.

CE Credits : 14

Faculty:

Dr. Alex Bongard

Dr. Steven Bongard

Ms. Michelle Ryckman

Ms. Flora Santos

Mr. Terry Xie

Dr. John P. Zarb

Contact :
1-877-229-6002
courses@genesiseducation.ca