Product Complaint Form - Frequently Asked Questions (FAQs)

Product Complaint Form

How to report a product complaint

For implants, abutments, clinical screws, instruments and tools

At Nobel Biocare we take all product complaints very seriously. Our ultimate goal is to identify the root cause of product failures, implement countermeasures and integrate our learnings into new product developments. In order to do this and to comply with regulatory reporting requirements, we ask you to complete our product complaint form.

To submit a product complaint, please perform the following steps:

  1. Fill in the online product complaint form and press “Submit”.
  2. Open the confirmation e-mail you receive and print out the attached PDF with the complaint information.
  3. Decontaminate the product.
  4. If available, prepare copies of supporting documents (e.g. X-rays/photos along with Patient ID number).
  5. Pack and ship the product with the PDF print-out and copies of supporting documents and ship it to your local customer service or returns department address (see section “Pack and Ship the product” below).

Upon receipt, we will review your complaint and provide a replacement product according to our Warranty Program terms.

Fill in the form

Decontaminate the product

For returns, all products retrieved from a patient must be disinfected and sterilized. Please follow the applicable instructions below:

  • Disinfection: Use agent intended for manual disinfection, e.g. ortho-phthalaldehyde solution (rinse carefully and do not clean mechanically).
  • Sterilization:

For USA: Steam sterilization 270°F (132°C) for four minutes when using pre-vacuum method and 15 minutes when using the gravity method. Dry for 20 to 30 minutes when using pre-vacuum method and 15 to 30 minutes when using the gravity method.

For outside USA: Temperature 132°C (270°F), max. 137°C (279°F) for three minutes (up to 20 minutes). Dry for 10 minutes in chamber.

IMPORTANT: A sterilization pouch must be used and the indicator on the pouch should show that it has been put through a sterilization cycle. For products which cannot be sterilized, please follow only the disinfection instructions and insert the applicable product(s) into a sterilization pouch.

Pack and ship the product

Sterilization pouch

Please write the following information on the pouch:

  • Product description (e.g. NobelReplace xxxx)
  • Date the issue occurred
  • Unique Complaint ID as stated in the confirmation e-mail
  • Patient code

Outer shipping container, with registered e-mail

  • Name and address of Customer Service or Returns department Nobel Biocare (see address below)
  • Use a box or padded envelope as shipping container
  • Label the shipping container as “Decontaminated”

Nobel Biocare is not responsible for lost shipments. Please use a shipment method that allows for shipment tracking.

Contact details and shipping address

If you need further support, please contact your local Customer Service department.

Americas

United States

Shipping Address:

Nobel Biocare, USA
Attn: Returns Department
1889 W. Mission Blvd
Pomona, CA  91766
USA

Phone: +1 800 322 5001 ext. 1527

E-mail: us.cs.complaints@nobelbiocare.com

Canada

Shipping Address:

Nobel Biocare Canada Inc.
150 Via Renzo Drive, Unit 2
Richmond Hill, ON
L4S 0J7
Canada

Phone: +1 800 939 9394

E-mail: order.canada@nobelbiocare.com

Mexico

Shipping Address:

Nobel Biocare México
Av.Revolución 1267 piso 18
Col Los Alpes
CP 01040
CDMX, Mexico

Phone: +52 55 524 974 60 op 1

E-mail: mexico.cs@nobelbiocare.com