Midas

Effortlessly design and print restorations in minutes

Learn more Schedule a demo
What can Midas do?
How to use Midas
Midas features & benefits
 
Midas

Digital press stereolithography (DPS) 

Fast, easy, and revolutionary

Digital press stereolithography (DPS) allows Midas to print up to three definitive crowns in 10 minutes, regardless of filler content. Now, you can place ceramic composite restorations quickly and at a fraction of the cost.

Before pressing

Viscous material sits in the pressurized resin chamber. The build platform is tucked into the build cylinder.

While pressing

The material is pressed and dispensed into the build area. Hydrodynamic principles push the build platform up as it cures.

After pressing

When the pressing is finished, the build platform is ready for extraction along with your printed restoration.

What can Midas do?

One capsule, infinite possibilities 

The Midas Resin Capsule distills the build platform, tank, and material into a single-use item. This innovation unlocks viscosity-agnostic 3D printing while offering incredible speed, accuracy, and workflow simplicity.

SprintRay icon

No viscosity limitations

SprintRay icon

Small footprint, high output

SprintRay icon

Zero training, no upkeep

SprintRay icon

AI restoration design

SprintRay icon

 Multi-restoration printing

SprintRay icon

 Affordable chairside workflow

Crowns 

Full-contour crowns with lifelike esthetics and mechanicals, thanks to extremely high filler content.

Inlay & onlay

Complex shapes print with pixel-perfect accuracy on Midas – fabricate up to two inlays per capsule.

Veneers

Print up to three incredibly thin, strong veneers per capsule for minimally invasive cosmetics.

Be at the forefront of dental innovation and book a demonstration today

Get connected with your local Nobel Biocare representative

Schedule a demo
Midas

Scan. Place. Press.

The easiest way to fabricate chairside restorations

Step 1
Scan

Every Midas is coded with its material type, shade, manufacturing information and expiration date. When It's time to print, simply scan the capsule using the barcode scanner. 

SprintRay icon

Automatic medical device tracking

SprintRay icon

Resin and shade detection

SprintRay icon

Robust exterior proofing

Step 2
Place

Midas has 3 printing slots on the heated print glass.
After scanning, the onboard computer will tell you where to place the cartridge.

SprintRay icon

Print up to three capsules at once

SprintRay icon

Capsule placement detection

SprintRay icon

Fully guided workflow

Step 3
Press

Midas will start pressing once you've scanned and placed all the capsules for a print job. The print loop will slowly lower while the resin is cured.

SprintRay icon

Print in less than nine minutes

SprintRay icon

Mess-free workflow

Step 4
Remove print

Remove the capsule from the print glass. Pull the tab on the build platform to remove it from the capsule. Your restoration is ready for post processing.

 

Midas

Every considered detail

Engineered for precision, designed for your workflow

From Midas' thoughtful size and proportions to the materials used in manufacturing, SprintRay pulled out every stop to bring digital press stereolithography to your office. Its patented printing method allows ultra-fast fabrication of ceramic restorations.

Unparalleled accuracy

Midas harmonizes hardware, software, and workflow. The resin dose capsule eliminates workflow variability. With direct projection and 385 nm light, Midas ensures outstanding precision.

 385 nm light

Midas uses 385 nm UV-A light for superior depth of cure control, enhancing print quality and resin development. This innovation improves surface finish, layer accuracy, and fit for pixel-perfect restorations.

Incredibly compact

Midas is compact, not needing a large resin tank or permanent build platform. It fits almost anywhere, with resin stored in sealed capsules, making it less sensitive than conventional 3D printers.

45 µm direct projection

Midas uses a 45 µm projector to deliver light to the print glass with minimal distortion and high precision. This setup simplifies the optical path, eliminating the need for light reflection and greatly improving accuracy.

Simplicity unlike any other 3D printer

Resin capsule technology supercharges the best workflow in dentistry. No more exposed resin, resin tanks, or build platforms. Midas makes it simple and is set to transform dental care.

Zero maintenance

Ready for your maintenance checkup? Wipe down the print glass. Seriously – that’s it. No resin tanks, no build platforms, just place and print.
 

Training-free workflow

Scan, place, print. The workflow for Midas is really that simple: Scan each cartridge and follow the instructions on where to place it. It’s error-free and requires no training.

Medical device tracking

The onboard QR code scanner helps simplify the workflow, but it also provides medical device tracking for expiration dates, lot numbers, and more.

Simplified resin handling

Midas Capsules come in sets of three for easy stocking of multiple shades and resin types. The storage container protects them from the elements and is stackable for simplified inventory management.

Be at the forefront of dental innovation

Get connected with your local Nobel Biocare representative

SprintRay 3D printers and supplies are manufactured by/for SprintRay Inc., 2705 Media Center Drive, Suite 100A, Los Angeles, CA, and distributed by Nobel Biocare USA, LLC.