Canada (EN)
Digital press stereolithography (DPS)
Fast, easy, and revolutionary
Digital press stereolithography (DPS) allows Midas to print up to three definitive crowns in 10 minutes, regardless of filler content. Now, you can place ceramic composite restorations quickly and at a fraction of the cost.
Before pressing
Viscous material sits in the pressurized resin chamber. The build platform is tucked into the build cylinder.
While pressing
The material is pressed and dispensed into the build area. Hydrodynamic principles push the build platform up as it cures.
After pressing
When the pressing is finished, the build platform is ready for extraction along with your printed restoration.
What can Midas do?
One capsule, infinite possibilities (DPS)
The Midas Resin Capsule distills the build platform, tank, and material into a single-use item. This innovation unlocks viscosity-agnostic 3D printing while offering incredible speed, accuracy, and workflow simplicity.
No viscosity limitations
AI restoration design
Small footprint, high output
Multi-restoration printing
Zero training, no upkeep
Affordable chairside workflow
Crowns
Full-contour crowns with lifelike esthetics and mechanicals, thanks to extremely high filler content.
Inlay & onlay
Complex shapes print with pixel-perfect accuracy on Midas – fabricate up to two inlays per capsule.
Veneers
Print up to three incredibly thin, strong veneers per capsule for minimally invasive cosmetics.
Be at the forefront of dental innovation and book a demonstration today
Get connected with your local Nobel Biocare representative
Scan. Place. Press.
The easiest way to fabricate chairside restorations
Step 1
Scan
Every Midas is coded with its material type, shade, manufacturing information and expiration date. When It's time to print, simply scan the capsule using the barcode scanner.
Automatic medical device tracking
Resin and shade detection
Robust exterior proofing
Step 2
Place
Midas has 3 printing slots on the heated print glass.
After scanning, the onboard computer will tell you where to place the cartridge.
Print up to three capsules at once
Capsule placement detection
Fully guided workflow
Step 3
Press
Midas will start pressing once you've scanned and placed all the capsules for a print job. The print loop will slowly lower while the resin is cured.
Print in less than nine minutes
Mess-free workflow
Step 4
Remove print
Remove the capsule from the print glass. Pull the tab on the build platform to remove it from the capsule. Your restoration is ready for post processing.
Every considered detail
Engineered for precision, designed for your workflow
Simplicity unlike any other 3D printer
From Midas' thoughtful size and proportions to the materials used in manufacturing, SprintRay pulled out every stop to bring digital press stereolithography to your office. Its patented printing method allows ultra-fast fabrication of ceramic restorations.
Resin capsule technology supercharges the best workflow in dentistry. No more exposed resin, resin tanks, or build platforms. Midas makes it simple and is set to transform dental care.
Unparalleled accuracy
Midas harmonizes hardware, software, and workflow. The resin dose capsule eliminates workflow variability. With direct projection and 385 nm light, Midas ensures outstanding precision
385 nm light
Midas uses 385 nm UV-A light for superior depth of cure control, enhancing print quality and resin development. This innovation improves surface finish, layer accuracy, and fit for pixel-perfect restorations.
Incredibly compact
Midas is compact, not needing a large resin tank or permanent build platform. It fits almost anywhere, with resin stored in sealed capsules, making it less sensitive than conventional 3D printers.
45 µm direct projection
Midas uses a 45 µm projector to deliver light to the print glass with minimal distortion and high precision. This setup simplifies the optical path, eliminating the need for light reflection and greatly improving accuracy.
Zero maintenance
Ready for your maintenance checkup? Wipe down the print glass. Seriously – that’s it. No resin tanks, no build platforms, just place and print.
Training-free workflow
Scan, place, print. The workflow for Midas is really that simple: Scan each cartridge and follow the instructions on where to place it. It’s error-free and requires no training.
Medical device tracking
The onboard QR code scanner helps simplify the workflow, but it also provides medical device tracking for expiration dates, lot numbers, and more.
Simplified resin handling
Midas Capsules come in sets of three for easy stocking of multiple shades and resin types. The storage container protects them from the elements and is stackable for simplified inventory management.
SprintRay 3D printers and supplies are manufactured by/for SprintRay Inc., 2705 Media Center Drive, Suite 100A, Los Angeles, CA, and distributed by Nobel Biocare USA, LLC.